PDA

View Full Version : Back posting after a few years


David Jackson
07-19-2009, 09:45 PM
Hi Mike;

I have an '01 FXDXT with HTCC CNC ported heads and HD 4.060" barrels and the pistons the HD catalog said would match the heads. Unfortunately the HD SE catalog lied and the pistons I have look as though they came out of a flathead lawnmower motor. I am using the Cycle Shack 2" diameter pipes.

The bike has Wood 408G cams and a Wood modified 51mm Keihn carb. I have the adjustable MAP set at #2 0 degrees advance. I finally had a dyno run done and the results are somewhat disappointing; possibly because of the bad pistons!

I got 120 tq but only 109 hp. The good thing is that the torque curve is a pretty gentle one being over 100 ft/lb at about 2200 rpm (105 lb/ft) and staying over 100 ft/lb until 5,500 rpm. The bike starts and runs fine, the nice fat torque curve makes it easy to ride and all that; but, of course the numbers are pretty weak for a 113" motor.

Any ideas about a cheap fix to get more hp? Which MAP curve would you recommend and how much spark advance (the HD gadget is what I have, plugs into the system).

Mike
07-29-2009, 09:11 AM
Thank you for joining our site!

Our forum now requires subscription to use the "Ask Mike" feature found in the "Question and Answers" catagory. If you wish to direct a question to Mike for a reply, subscribtion is required
MIKE WILL NOT RESPOND TO QUESTIONS POSTED IN THE FREE USER FORUMS/CATAGORIES/THREADS. The dyno library is now part of the subscription section.

The "Discussion" forums and rest of this site allows free access and is open to all. and posts should be made in the "Question and Answers" catagory. Subscription also allows access to the worlds largest dyno library, a very powerful resource.
The "Discussion" catagories are entended to be interactive between forum users. Posts and responses in these discussion boards are not neccessarily endorsed or recommended by Latus Motors and, as such, may not reflect our policies and/or proceedures.

The purpose of this site is to promote Latus Motors, Harley-Davidson and Buell products and services. As a private domain, Latus Motors reserves the right to edit or delete offensive, negative or factually incorrect posts at our descretion.