conversion

[SPORT2007]

hello Mike:
I'm going to conversion 883 to 1200
my bike is a 883 l 2007
this is the setup:
25740-05 - Sportster High Output Cam set

16607-07 - SE Performance Heads

22711-04 - SE High comp piston kit (stock bore, brings it up from 9.5:1 to 10.5:1)(pls, correct me if I'm wrong)

18223-98 - Perfect fit pushrod kit.(this is listed as the pushrod kit to be used in conjunction with the SE Perf heads)

1:Is much compression for street use?
2:with this configuration,dont suffer the engine
3:i use the bike for higway use and medium trips

thank you
Adolf Kunzendorf

[Mike]

Our forum now requires subscription to use the "Ask Mike" feature found in the "Question and Answers" catagory. If you wish to direct a question to Mike for a reply, subscribtion is required and posts should be made in the "Question and Answers" catagory. Subscription also allows access to the worlds largest dyno library, a very powerful resource.

MIKE WILL NOT RESPOND TO QUESTIONS POSTED IN THE FREE USER FORUMS/CATAGORIES/THREADS. The dyno library is now part of the subscription section.

The "Discussion" forums and rest of this site allows free access and is open to all. The "Discussion" catagories are entended to be interactive between forum users. Posts and responses in these discussion boards are not neccessarily endorsed or recommended by Latus Motors and, as such, may not reflect our policies and/or proceedures.