96 ci..

[brnew]

HI Mike, If someone was interested in upgrading an 06 88 c.i., what can be done to get some decent numbers with the exchange of the 96 c.i. jugs & all the stock parts of a 07 ? I have all the pieces from my 96 c.i., and if they wanted to do something without spending a lot of money to get a little more performance, like low to midrange hp/tq, what can be done? I know there is little information here, but i have the parts and he wanted to use them if there was an increase in power to be had.

thanks

[adlerx]

Sorrry, not Mike and not any kind of an expert by any stretch of the imagination but I do know that the bore on the 96" motors is the same as the 88". The pistons are a little different because of the stroker crank but the jugs are exactly the same. The stroker crank with it's longer stroke is where the increased displament (cubic inches) comes from.....

[brnew]

adlerx
Thanks , I received the sme answers from another party after I posted.
I appreciate your response.

[brnew]

Sorry about the spelling(same answers)!

[Mike]

The cylinders are the same. The pistons are not, different wristpin location for the longer stroke. The flywheels are not only longer stroke but have a different sprocket shaft and are not enterchangeable to earlier models.

[brnew]

As usual; thanks for explaning as well as you do Mike! ;)