G'day with a twist of SERT

[stix68]

G'day from downunder Mike.
I have been talking with HDMD88/DOC 1 regarding a Start-Up map to suit my build. After searching through his complete set of files he recommended talking to you.
I understand if your shop has a close or suitable SERT map, they are for sale. I would be grateful if you could take a look through your SERT library and let me know if you are able to help.

Build details are: 2007 TC107ci, Andrews 55 cams, Stock heads and T/Body, D&D Fatcat 2-1. C/moly P/rods and forged roller rockers.

I can see one maybe two canned maps on the latest disk that would enable a start, but if there is something out there closer to my build specs I really would like to know, as a competent tuner willing to tune with SERT is just about impossible for me to find without travelling to the other side of the country 2k miles.
Your help appreciated.
Regards,
Rick Blazely
Western Australia
Australia

[Mike]

Sorry, we do not have a match for your combo. I was hoping that a 103 or 110 map would be close but those we have are much too different to be much help. We do have a couple of 07 96ci maps with the Fatcat system. With tuning constants changes, these could be place to start, but these are for stock cams and again may not be very close. It may be a coin toss if using one of these will be any better than starting with a canned map since either will need modification.
Mike

[stix68]

No worries, thanx for taking the time to look and respond. A lack of tuners in my area will not deter me from persisting with the SERT. I will prevail.LMAO.
Thanx again.
Rick.

[Mike]

Good man!!!
Mike