SERT Map for 07 110

[GamblerSCS]

Hi Mike

Built a 96 to a 110 with 560 cam, 10.3 piston, 50mm throttle body and ported polished heads, have you done any maps for this type build yet on a SERT? Need a Map. this is on a 2007 FLHTCUI.

Sylvester

[Mike]

We've done only one High output map but for an RB Racing Blackhole exhaust. Unless you are also using this exhaust, we would not have a match. We will be remapping the same bike with a Vance and Hines big Radius 2-1 as soon as the pipe comes off backorder and the customer arranges the time. The cams, throttle body, injectors and heads used were prretty unique and may also not be a good match.
Thanks, mike

[GamblerSCS]

what would you figure it would cost to get the bike from Miami to you and back shipping wise?

[GamblerSCS]

or do you have a recommendation for a local tuner in florida who knows what he is doing with SERT

[Mike]

Our guy in South Carolina says about $1700.00 round trip.
Mike

[Mike]

We have a customer in Florida with one of our throttle bodies who has found a good tuner (has to be to make it work). I'll try to get that info.
Mike

[roofeditor]

I'm in Florida also and also looking for a good tuner. Doc from Orlando was once a good source but as of the moment does not have access to a dyno. The name Carls speed shop in daytona has been mentioned. Your thoughts?

[Mike]

My guy in Florida is in Fort Meyers and I still have not found the name of his tuner. I know Carl (ran one of Carls old pro-stock bikes back in 1990, Carl used to help out), they are very good.
Mike