FLTRSEI2 PCIII USB map

[scooterhair]

Hello,

I'm looking for a map for my 01 FLTRSEI2 using a PSIIIUSB.

This is what I have: K&N air cleaner, 95", flat top pistons, SE Pro heads, 211 cams, stock exhaust.

Does anyone have any suggestions or additions?

Thanks
Scooter

[scooterhair]

This is my current map, It's OK but I have lost my top end MPH. I still have good tourqe through the RPM range

Fuel table

5 0 0 0 0 0 0 0 0
5 4 0 0 0 0 0 0 0
0 4 4 3 3 3 4 5 6
0 0 4 3 3 3 4 5 6
-2 0 3 3 3 3 4 5 6
-2 0 0 0 3 3 4 5 6
-2 0 0 0 3 3 4 5 5
-2 0 0 0 0 4 4 4 5
-2 0 0 0 0 4 5 4 4
-2 0 0 0 0 0 5 4 4
-2 0 0 0 0 0 0 3 3
-2 0 0 0 0 0 0 3 2
-2 0 0 0 0 0 0 3 2

Ignition Table

0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 -1 -2
0 0 0 0 0 0 -1 -1 -2
0 0 0 0 0 0 -1 -1 -2
0 0 0 0 0 0 -1 -1 -2
0 0 0 0 0 0 -1 -1 -2
0 0 0 0 0 0 -1 -1 -2
0 0 0 0 0 0 -1 -1 -2
0 0 0 0 0 0 -1 -1 -2


Thanks
Scooter

[Mike]

Sorry, no match.
Mike

[Mike]

May be in the timing. We usually add about 4 degrees in the top end. You may also benefit from Advanced Mode mapping where each cylinder is independantly mapped.
Mike