50 mm throttle body

[u167373]

I need a definitive answer, will cruise control work in conjunction with the SE 50 mm throttle body. The '06 SE catalog says it's not compatible, the '07 SE catalog says nothing either way. I went to my local dealer and with the assistance of the head tech got a 50mm out of the box. The tech looked it over and said that all of the necessary mounting points and cable attachments are the same as stock so there would be no reason why it wouldn't work. Need to know if you have any experience with this situation.

[Mike]

The 50 WILL work with cruise. You'll need to do a cable lash adjustment once installed. Instructions for this are in the manual. With the motor work that usually goes with the 50, be aware that when cruise "resume" kicks in, it can be more aggressive than what you may be used to and catch you somewhat by surpise. It's REALLY interesting on 150hp stuff!!!
Thanks, Mike

Thanks for the reply, that's really good news, I'm going from a 95 inch to a 113 with SE HTCC Ported heads, Pistons, 264's, and 50 mm TB. From what I've read I could probably get more HP and TQ from after market products and have my existing heads done by someone local but I want to stick to stock SE parts. I think this is a streetable combination that should produce adequate mid and high end power.

[u167373]

Thanks for the reply, that's really good news, I'm going from a 95 inch to a 113 with SE HTCC Ported heads, Pistons, 264's, and 50 mm TB. From what I've read I could probably get more HP and TQ from after market products and have my existing heads done by someone local but I want to stick to stock SE parts. I think this is a streetable combination that should produce adequate mid and high end power.