Lean fuel

[Shoey]

I have a 04 FLSTCI. Just did 95, 9-1 wiseco pistons, 37g andrews cams, .30 head gasket, ported heads with evo ex. valve, fueling oil pump, K&N air filter S.E. 16 ga. double barrel ex. with V&H baffles, stage 1 download,Terry Componets Terminal Velocity, Bike runs lean has pop between 50-60 mph. Called Terry they said fuel needs to be in the ballpark for there system to work and to do a stage 2 download. What stage 2 download would be the best to use Harley shop say's there are 3 or 4 different one's? Or should I use a different system Thanks

[Mike]

Many of the aftermarket self learning systems require the base map to be within 80% of the final "tuned" map since the O2's typically have approx. a 20% range. You have two possible choices 32860-02C or 32861-02D with the first being for a less aggressive package. I typ. like to choose the more aggressive map (normally richer) and then have the tuning device tune from rich to lean rather than lean to rich. That way if the tuning device cannot reach it's goal you'll be err'd to the rich side and not the lean. Less chance of damaging the motor. So on that logic I would go with the 32861-02D version which is available from your dealer on Digital Technician.
Thanks, Mike

[Shoey]

Mike, Got the download installed. Went for short ride [it's cold with snow] bike runs a lot stronger. Didn't ride far enough to dial in TV Thanks Shoey

[Mike]

Thank you for the update. Mike