PDA

View Full Version : 2 into 1


Sundance
09-15-2006, 10:00 PM
Mike, I'm thinking about buying some 2 into 1's for my 03 Roadglide(AMS heads and 95",TW26G) Which ones would you recommend and will I get bigger numbers over stock headers with Screaming Eagle Slip ons???

Thank you

Mike
09-18-2006, 10:00 PM
I'm still a D&D Fatcat fan. The peak torque number may be slightly lower but the curve will be very flat with the dip at 2k (below where most ride). Peak hp should be higher vs the SE slip-ons/Y-pipe. If your EFI, remapping will be required. The Bassanni Road Rage is also another good choice and will perform very similar to the D&D but with the torque dip slightly higher in the rpm range and slightly wider vs the D&D. Fit of the Road Rage is not as good as the D&D, can be more difficult to line up and both may enterfere with the "Billet" brake pedal as used on the SE CVO's.
Thanks, Mike