SE251

[kgoose]

Mike,

The SE251 cams seems like good cams for a TC SE103 or a Axtell TC 107 kit. Not sure what max compression ratio the SE251 can handle. Just wondering why we do not here more about this cam.

My thought is because it is not gear drive.

Any thoughts or comments?

[Mike]

One of my personal favorites and are used in our 95ci kits with 10.2+ compression. Depending on your compression ratio it could be ok for either of these motors. If comp. more than 10.5 then a little more cam would be needed. As H-D cams they are only available in chain drive.
Thanks, Mike