PDA

View Full Version : Electronic Module


hogman1963
02-13-2006, 10:00 PM
Mike,
I have a 2000 Deuce with an 88B motor. I had it bored to 95 ci., had Baisley do the pro-stock work to the heads, put a Woods w-6 cam in it, Installed a 42mm mukuni carb and Bub exhaust.

My question is should I install an adjustable electronic module? I'm looking at Screamin Eagle P/N 32704-01.

I want to consider the best bang for my buck. Will a stock module be suffecient? Will I get significantly more life out of the motor by installing this part? Will I notice any horse power difference by installing this item? Will it just make my horse power I get more effecient?
Steve

Mike
02-13-2006, 10:00 PM
The 32704-01 module would be a good choice for your combo. The benefits are the ability to access the horsepower you have available (higher rev limits) and to tune for optimum performance (selectable curves). You should notice a crisper, more eager feeling to the bike once the setup is finalized. If you decide to go with this module, simply try different curves and timing to see what affect they have until you find the best.
Regards, Mike