Duplicate 88" Build

[wizzard]

Hi Mike - I am planning on a mild 88" build on my 02 FLHRI. I like what I see on one of your dyno charts. Is it OK for you provide me with more detail on the customer's bike components so that I can duplicate the build? I would then bring it in to Latus for tuning. Thanks. Bill

[Mike]

Yes, we can provide more detailed info on any dyno chart. There are charts for bikes we did not build and so, some info may not be available for those. Let me know which chart your are inerested in.
Regards, Mike

[wizzard]

Thanks Mike, The build in question is a 2005,FLTRI, Pro Pipe, Edwards in the Dyno Exhaust section. I'm interested in this because there is no "dip" in the curves. I thought most 2-1's had a characteristic dip.
Bill

[Mike]

This is a classic case where important run data is not available because the run was started at too high RPM. Our dyno operators have been instructed to start pulls from 1200-1500 to collect this data. I'll post a "before" run on this sight (these were made from 1500), to show the full curve. The Pro-pipe actually does dip between 2-2.5k but not as much as bikes with cams. One of the things that contributes to these dips is valve overlap in cam timing. The stock cams have typ. 2-6 deg overlap. Most bolt in cams have 18-38 deg. Mr. Edwards bike had stock cams, SE air cleaner kit and the Pro-pipe.
Regards, Mike